1 Introduction
Maschinenfabrik Reinhausen 20148 3550953/00 ENTAPCON® 230 pro
Introduction
This technical file contains detailed descriptions on the safe and proper in-
stallation, connection, commissioning and monitoring of the product.
It also includes safety instructions and general information about the prod-
uct.
This technical file is intended solely for specially trained and authorized per-
sonnel.
Manufacturer
The product is manufactured by:
Maschinenfabrik Reinhausen GmbH
Falkensteinstraße 8
93059 Regensburg, Germany
Tel.: (+49) 9 41/40 90-0
Fax: (+49) 9 41/40 90-7001
E-mail: sales@reinhausen.com
Further information on the product and copies of this technical file are avail-
able from this address if required.
Subject to change without notice
The information contained in this technical file comprises the technical speci-
fications approved at the time of printing. Significant modifications will be in-
cluded in a new edition of the technical file.
The document number and version number of this technical file are shown in
the footer.
Completeness
This technical file is incomplete without the supporting documentation.
Safekeeping
This technical file and all supporting documents must be kept ready at hand
and accessible for future use at all times.
Notation conventions
This section contains an overview of the symbols and textual emphasis
used.
1
1.1
1.2
1.3
1.4
1.5
To Next Page
Loading...
