MR tapcon 230 pro - Functions and settings; General

7 Functions and settings
Maschinenfabrik Reinhausen 2014 593550953/00 EN TAPCON® 230 pro
Functions and settings
This chapter describes all the functions and setting options for the device.
Key lock
The device is equipped with a key lock to prevent unintentional operation.
You can only set or change the parameters when the key lock is deactivated
in manual mode.
Activating key lock
To activate the key lock, proceed as follows:
► Press and at the same time.
ð A confirmation appears in the display for a brief period. The key lock is
activated. Parameters can no longer be entered.
Deactivating key lock
To deactivate the key lock, proceed as follows:
► Press and at the same time.
ð The key lock is deactivated. Parameters can be entered.
General
You can undertake general settings on the device in the General menu item.
You can set the following general parameters:
▪ Language [► 48]
▪ Regulator ID
▪ Baud rate (COM1 setting)
▪ Raise/Lower pulse duration
▪ Operations counter
▪ Display dimming
▪ Key lock
▪ Function monitoring
▪ Motor runtime
▪ Manual mode/auto mode
▪ Local/Remote
Setting device ID
You can use the device ID parameter to assign a 4-digit ID to the device.
This ID is used to uniquely identify the device in the TAPCON®-trol software.
To set the device ID, proceed as follows:
7
7.1
7.2
7.2.1