4 Packaging, transport and storage
Maschinenfabrik Reinhausen 201430 222/08 ENTAPCON® 240
Packaging, transport and storage
Packaging
Suitability, structure and production
The goods are packaged in a sturdy cardboard box. This ensures that the
shipment is secure when in the intended transportation position and that
none of its parts touch the loading surface of the means of transport or touch
the ground after unloading.
The box is designed for a maximum load of 10 kg.
Inlays inside the box stabilize the goods, preventing impermissible changes
of position, and protect them from vibration.
Markings
The packaging bears a signature with instructions for safe transport and cor-
rect storage. The following symbols apply to the shipment of non-hazardous
goods. Adherence to these symbols is mandatory.
Protect
against
moisture
Top Fragile Attach lifting
gear here
Center of
mass
Table 6: Shipping pictograms
Transportation, receipt and handling of shipments
In addition to oscillation stress and shock stress, jolts must also be expected
during transportation. In order to prevent possible damage, avoid dropping,
tipping, knocking over and colliding with the product.
If a crate tips over, falls from a certain height (e.g. when slings tear) or expe-
riences an unbroken fall, damage must be expected regardless of the
weight.
Every delivered shipment must be checked for the following by the recipient
before acceptance (acknowledgment of receipt):
▪ Completeness based on the delivery slip
▪ External damage of any type.
The checks must take place after unloading when the crate or transport con-
tainer can be accessed from all sides.
4
4.1
4.1.1
4.1.2
4.2
To Next Page
Loading...
