Matrix System
®
117
Programming Inactivity Timing
To program Inactivity Time, press 0. Then press and hold the Inactivity button on the Control Panel. To
deactivate inactivity timing, press auto-clear.
Figure 65 – Programming Inactivity Timing
Enter desired inactivity time in
minutes from 1-99
Press and hold INACTIVITY
(concealed) button
Control Module will
beep and clear
Programming Default Time
Select desired components
Select the number “30” on
the numeric keypad
Press and hold the SYSTEM
button until panel beeps.
Default system
programming is complete.
Programming Default System
To Next Page
Loading...
Need help?
General
