MTI Matrix System Series - Matrix System Sample Autosound System II; Figure 43 - Matrix System; Figure 50 - Matrix System

Matrix System
®
89
Matrix System
®
• Sample Autosound System II
This configuration creates a small but versatile system for the demonstration of virtually any Autosound
product combination – ranging from a simple head unit and pair of full-range speakers to a full tri-amp
configuration with front and rear speaker pairs and separate subwoofers with their own dedicated
amplifiers.
By incorporating a dedicated crossover/passive equalizer into the low-level bus, the 2-Channel low-level
output of the head units can be separated and routed to front, read and dedicated subwoofer amplifiers
and front, rear and subwoofer speakers.
System Component Mix Switching Requirements
16 Head Units (HL) 2 1312 Switching Modules
7 Front Amplifiers (L/H) 1 1312 Switching Module
7 Rear Amplifiers (L/H) 1 1312 Switching Module
16 Front Speaker Pairs (H) 2 1410 Switching Modules
8 Rear Speaker Pairs (H) 1 1410 Switching Module
8 Subwoofers (L/Hc - requires dedicated Sub Amplifier) 1 1442 Switching Module
MVP Control Panel: 1 MVP Control Module
3* MVP Dual Chain Modules
1 12" Flush Mount Frame
1 MVP Power Supply
*
one component chain remains available for future use