3-139
3.17.1 Set consumable order sheet
1. Clear the junk data, if necessary (see “Clear consumable order sheet,” next page).
2. Press <Menu>, <*>, <1>, <5>.
Set Order Sheet
/ /Enter
3. Press <Enter>. The LCD will show:
Dealer Code ;Upper
Enter the dealer’s code. The fax number can be up to 10 characters in length.
4. Press <Enter> to save the distributor’s code and continue. The LCD will show:
Dealer Name ;Upper
Enter the dealer’s name. The name may be up to 30 characters in length.
5. Press <Enter> to save the distributor’s name and continue. The LCD will show:
Dealer Tel No
Enter the distributor’s phone number. The phone number may be up to 20 characters in length.
6. Press <Enter> to save the distributor’s phone number and continue. The LCD will show:
Dealer Fax No
Enter the dealer’s fax number. The fax number can be up to 20 characters in length.
The consumable order sheet will be sent to this fax number when “Transmit” is selected in the
“Order Sheet” setting in step 13.
7. Press <Enter> to save the distributor’s fax number and continue. The LCD will show:
CustAccount ;Upper
Enter the customer’s account. The customer’s account may be up to 10 characters in length.
8. Press <Enter> to save the customer’s account and continue. The LCD will show:
Cust Name ;Upper
Enter the customer’s name. The customer’s name may be up to 30 characters in length.
9. Press <Enter> to save the customer’s name and continue. The LCD will show:
Address 1 ;Upper
Enter the customer’s address for the upper row. The customer’s address may be up to 30 characters
in length.
10. Press <Enter> to save the customer’s address and continue. The LCD will show:
Address2 ;Upper
Enter the customer’s address for the Lower row. The customer’s address may be up to 30 characters
in length.
11. Press <Enter> to save the customer’s address. The LCD will show:
Cust Tel
To Next Page
Loading...
Need help?
General
