3-151
3.30 Quick Initial settings
At installation of this machine, you should set some parameters according to the following procedures.
You can do the following setting with continuously.
1. Initial settings
2. Consumable order sheet settings
3. Service Report settings
Note: Before starting the installation settings, clear the memory by pressing <Menu>, <*>, <0>, <2>,
<Enter>.
1-1. To start Initial setting mode, press <Menu>, <*>, <9>, <9>. The LCD shows:
Language :English
/ /Enter
1-2. Enter the items following the LCD.
See “Initial setup” in the User’s Guide for detailed instructions.
1-3. After you have entered all the initial setup items, press <Enter>.
2-1. The LCD now shows the Consumable order sheet setting menu and Service report setting menu.
Use <
> or < > and display the desired menu.
Set Order Sheet
Reset Order Sheet
Print Order Sheet
Set RDS
Clear RDS
/ /Enter
• To set the consumable order sheet, select “Set Order Sheet” and press <Enter>. See page 3-139
how to enter the items.
• To clear the consumable order sheet setting, select “Clear Order Sheet” and press <Enter>. See
page 3-140 how to enter the items.
• To print the consumable order sheet, select “Print Order Sheet” and press <Enter>. See page 3-
140 how to enter the items.
• To set the service report settings, select “Set RDS” and press <Enter>. See page 3-148 how to
enter the items.
• To clear the service report, select “Clear RDS” and press <Enter>. See page 3-149 how to enter
the items.
• To return to the standby mode, press <Reset>.
To Next Page
Loading...
Need help?
General
