4-27
Cleaning the Document glass, ADF glass and Document pad
1. Open the platen cover.
2. Get a soft, lint-free cloth and moisten it with isopropyl alcohol.
Important: Make sure the cloth doesn’t have any rough areas. Otherwise, it could scratch the glass
surface of the FBS.
3. Using the cloth, gently clean the Document glass, ADF glass and the Document pad on the
underside of the platen cover.
Note: F-315 has no Document glass.
Document glass
ADF glass
Document pad
ADF glass
MFX-1950 F-315
Cleaning the drum charge wire and LED print head
If there are streaks on your print, the drum charge wire and LED print head may require cleaning..
1. Open the front cover.
2. Gently pull the blue cleaning rod toward you, making sure it fully extends. Then return the rod to its
original position. This operation also cleans the print head.
3. Close the front cover.
To Next Page
Loading...
Need help?
General
