4-18
What you see on the LCD What it means/What to do
Protect Doc. Stored A received document was in your fax’s memory when you tried to turn off
the security reception passcode.
Print the received document from your fax’s memory, then retry the
desired operation.
Scanner In Use The command you’re trying to enter requires the use of the scanner,
which is already in use.
Wait for the fax to complete the scan, then re-try the desired command.
SecurityRx is Off You tried to turn the security reception on using a Soft key which is
assigned to set the security reception to on or off, but security reception
setting has not set to on.
To turn on or off the security reception using a Soft key, first set the
security reception setting to on.
Select Paper Size You tried to make a copy in the following conditions:
•Paper size selection is set to “Auto”.
•The bypass tray has the paper other than A4, A5
or F4.
•Paper cassette(s) runs out of paper.
Press <Paper Size>
to select your desired paper.
Sub-Address In Use You tried to enter a sub-address identical to one already being used in
another F-Code box.
Enter a different sub-address.
Toner Low Your machine is almost out of toner. About 100 more sheets can be
printed.
Too Many Characters You attempted to enter too many numbers or other characters in the
current operation.
Press <Cancel> to delete the extra characters, then try again. You may
wish to review the operation’s appropriate instructions.
Too Many Locations You tried to enter too many numbers for a broadcast. You can enter up to
200 autodialer numbers and up to 30 numbers entered through the
numeric keypad.
Press <Cancel> to delete the extra numbers and then try again.
Too Many Steps You tried to enter too many steps for a macro. You can enter up to 60
steps into a macro key.
Use FBS Glass You tried to enlargement copy using the ADF. Your machine cannot
enlargement copy from the ADF.
Please set your document on the FBS glass to make the enlargement
copy.
To Next Page
Loading...
Need help?
General
