Handling the printer RJ-900X series OPERATION MANUAL
4-2
4.1 Print flow chart
The necessary procedure for printing with the printer is shown in the following flow chart.
Refer to each section if necessary.
• Do not open the front cover during printing. If the front cover is opened, printing will be
interrupted.
When the front cover is closed, the printer restarts printing, but high printing quality is not assured.
1. Create print data.
Create print data with application software.
2. Turn the power ON and set the media.
3.4 Media handling
4.2 Media
4.3 Media eject tray setting
3. Printing setup conditions.
4.4 Setting the printer driver
4.5 Menu setup on the operation panel
4.Perform the printing.
4.6 Operating from the operation panel
To Next Page
Loading...
Need help?
General