RJ-900X series OPERATION MANUAL Handling the printer
4-21
4.5.1.2.2 When "User1 to User4" is set in Media item
Setup item Setting value Description
Condition <Lines> The printing quality is set according to the content of
print data.
• Lines: Printing is performed with proper quality for
line drawings.
• Photo: Printing is performed with proper quality for
images.
Photo
PrintReso. HS360dpi / 360dpi /
<720dpi> / 1440dpi /
2880dpi
Set the resolution of the printing data.
Direction UniDir Set the operation direction of head during printing.
• UniDir: Printed in only one-way direction.
• •BiDir: Printed in two-way direction.
<BiDir>
Effect <None> The Effect function is not used.
Wave The printing joint will be the wave form.
The print quality may improve compared to “None”.
Fog The printing joint will shade off.
Set up this menu when obvious white lines or uneven
print density appear on printed media in “Wave”.
This is a mode suitable for low resolution.
Fine&Fuzz The printing joint will shade off as the wave form.
Performs the printing at slower speed than “Wave”.
Fine&Fog The printing joint will shade off.
Set this when there is horizontal unevenness in
“Fine&Fuzz”.
Prints at a slower speed than “Fine&Fuzz”.
A-S. Fine&Wave Performs “Wave” printing using the half of the print
head nozzles.
Since only the half of the print head nozzles are used,
printing speed becomes a half of “Wave”.
Set up this menu to improve the print quality compared
with “Fine&Fuzz”. If used when one side of the nozzles
is clogged, quality deterioration may be avoided.
B-S. Fine&Wave Performs “Wave” printing using the half of the print
head nozzles on the opposite side of “A-
S.Fine&Wave”.
Since only half of the print head nozzles are used,
printing speed becomes a half of “Wave”.
Set up this menu to improve the print quality compared
with “Fine&Fuzz”. If used when one side of the nozzles
is clogged, quality deterioration may be avoided.
ThinOut
(Black)
5 % to <100 %> The discharge of black ink during printing is adjusted to
the media quality.
ThinOut
(Color)
5 % to <100 %> The discharge of color ink during printing is adjusted to
the media quality.
To Next Page
Loading...
Need help?
General