RJ-900X series OPERATION MANUAL Handling the printer
4-43
4.5.1.7 Network Menu
Various settings on network interface can be set.
• For the operation of the setting menu, refer to “4.5.2 Menu Setup Procedure”.
Setup item Setting value Description
IPaddress 0.0.0.0 to <192.168.1.253>
to 255.255.255.225
IP address of the printer is set.
SubnetMask 0.0.0.0 to <255.255.255.0>
to 255.255.255.225
Subnet mask of the printer is set.
Gateway 0.0.0.0 to <192.168.1.254>
to 255.255.255.225
IP address of the gateway to which the printer connects
is set.
BiDir Port 1024 to <10610> to 49151 Port number of bidirectional port in the printer is set.
The same port number as the number which was set at
installation of printer driver is set.
MAC Address Display only Display the MAC address.
To Next Page
Loading...
Need help?
General