RJ-900X series OPERATION MANUAL Handling the printer
4-55
4.6.2 Stopping printing operation
If you want to stop printing operation for some reasons, operate as follows.
1. Press the [Cancel] key on the operation panel.
• The printer operates as follows.
4.6.3 Cut media
When the printer prints on roll media, it cuts media automatically after printing.
Roll media can be cut at any position.
According to the following procedure, cut roll media.
1. Check that the operation panel is Normal.
2. Check that the media loading lever is returned to the front side.
Printer Status Operation with the [Cancel] key pressed
Printing Terminate printing and delete a file of the data that remains in the printer.
Receiving, analyzing Delete the received and analyzed data, and delete a file of subsequent data.
Ink dry timer wait Release ink dry timer wait, and eject media.
To Next Page
Loading...
Need help?
General