Maintenance RJ-900X series OPERATION MANUAL
5-2
5.1 Replacing consumable components
This section describes the replacement time and steps of ink cartridge, roll media, razor blade and waste
fluid box.
5.1.1 Replacing ink cartridges
This sub-section describes the replacement time and steps of ink cartridges.
（1）Replacement time
a. If the operation panel displays "InkNearEnd"
• This message will be displayed when the ink in the ink cartridge gets low.
• You can check which color is nearing the end with the indicator on Operation panel.
2.2.6 Indicator Display
• Prepare the ink cartridge for replacement.
b. If the operation panel displays "Ink End"
• This message will be displayed when the ink in the ink cartridge runs out.
• You can check which cartridge needs replacing with the indicator on Operation panel.
2.2.6 Indicator Display
• Immediately replace with a new ink cartridge.
• Do not insert or remove the ink cartridge except at the time of replacement. Inserting or removing
the ink cartridge mixes the air within the ink tubing and failures such as nozzle detachment may
occur.
• If "Ink End" appears, printing cannot be performed until the new ink cartridge is inserted.
• If there is no cartridge for replacement at hand, leave the empty ink cartridge inserted to the printer.
Leaving the ink cartridge removed from the printer may result in a clogging head.
To Next Page
Loading...
Need help?
General