MUTOH DrafStation RJ-901X User Manual

Before using RJ-900X series OPERATION MANUAL
3-32
3.5.2 NozzleCheck
It is used for checking whether there is any clogging head, missing or blurred prints.
NOTE
• If the nozzle check result indicates that the checked points are blurred or missing, clean the head.
5.2.3 Head cleaning
Perform the nozzle check once again at the end of the work.
TIP
• Refer to the following for printing procedure.
3.5 TestPrint

MUTOH DrafStation RJ-901X Specifications

General

Brand	MUTOH
Model	DrafStation RJ-901X
Category	Printer
Language	English