Before using RJ-900X series OPERATION MANUAL
3-6
3.2.2 Turning the power OFF
Follow the procedure below to turn the printer OFF.
1. Verify the following regarding the operational condition of the printer.
• Printing or other operations are not in progress.
• Operation panel display is Normal.
2. Press the [Power] key on Operation panel to turn OFF the printer.
3. The Power lamp on Operation panel is turned off.
• If Operation panel is in the following status, the power is ON.
• The [Power] key is pressed in.
• The Power lamp lights up.
Press the key once again to turn OFF the power.
• The printer turns the power OFF.
• When the media is set, "Lift the lever" is displayed on Operation panel.Raise Media loading lever.
• "Please Wait" is displayed on Operation panel.
• All the lamps on Operation panel and the LCD monitor are turned OFF.
• The printer automatically turns the power OFF.
To Next Page
Loading...
Need help?
General