Handling the printer RJ-900X series OPERATION MANUAL
4-34
4.5.1.2.5 Initializing Adjust Print
Follow the procedure below to initialize print micro adjustment.
1. Display the Micro adjustment menu on Operation panel.
a. Press the [Menu] key on Operation panel.
• “*Menu* Test Print>” is displayed on Operation panel.
• Operation panel shifts to the Setup menu display.
b. Press the [>] key on Operation panel.
• “*Menu* Media Set>” is displayed on Operation panel.
c. Press the [Enter] key on Operation panel.
• “Type: Coated Media” is displayed on Operation panel.
d. Press the [+] key or [-] key on Operation panel to select the media type to use.
e. Press the [Enter] key on Operation panel.
• “Effect: None” is displayed on Operation panel.
• When using user media 1 to 4, “Print Quality: Drawing” is displayed on Operation panel.
f. Press the [>] key a few times on Operation panel and select “PF Adjust: Pattern A”.
• The procedure moves on to the Micro adjustment menu.
2. Press the [+] key or [-] key on Operation panel to select “Initialize”.
To Next Page
Loading...
Need help?
General