RJ-900X series OPERATION MANUAL Before using
3-29
3.5 TestPrint
Test printing is performed as shown in the following procedure, and confirm that the printer correctly
works.
1.
The printer is turned ON and more than A3 size of roll media or sheet media is loaded.
3.4.2 Loading roll media
3.4.3 Loading sheet media
2. Confirm that the printer functions normally.
3. Press the [Menu] key on the operation panel.
• Operation panel displays "*Menu* TestPrint>".
• Display shifts to Setting Menu.
4. Press the [Enter] key on the operation panel.
• Operation panel displays " TestPrint: Setup"
• Display shifts to TestPrint menu.
To Next Page
Loading...
Need help?
General