Maintenance RJ-900X series OPERATION MANUAL
5-20
3. Press the [<] key or [>] key on Operation panel to select “*Menu* Utility>”, and press the [Enter]
key.
• Utility menu is displayed.
4. Press the [<] key or [>] key on Operation panel to select “Replace Cutter”.
• Cutter replacement menu is displayed.
5. Press the [+] key or [-] key on Operation panel to select “Replace Cutter: Yes”, and press the
[Enter] key.
• Print head moves and stops above the platen.
• “After Replacing Cutter -> ENTER” is displayed on Operation panel.
To Next Page
Loading...
Need help?
General