RJ-900X series OPERATION MANUAL Maintenance
5-37
9. Attach the protective material (metal plate) for attaching the head unit, and attach it with thumbscrews.
10. Remove the printer from the stand.
Installation manual
11. Repack the printer.
（2）Post-transport procedure
1. Perform unpacking, assembling, and setting the printer.
Installation manual
2. Set the printer in an available condition.
5.3.2 Transporting the printerof (2) Steps after transfer
No. Name
1 Protective material (metal plate) for attaching the head unit
2Thumbscrew
To Next Page
Loading...
Need help?
General