Before using RJ-900X series OPERATION MANUAL
3-40
5. Press the [Enter] key on Operation panel to display the IP address setting menu.
• "192.168. 1.253" (default) is displayed on Operation panel.
6. Press the following keys on Operation panel to set the value.
• [+] key: increases the setting value.
• [-] key: decreases the setting value
• [Enter] key: changes the setting value for the next segment.
• The settings are saved in the 4th segment, and the display returns to the previous menu.
• Be sure to set the IP address after consulting the network administrator.
• Allocate the IP addresses that do not overlap the computers or routers within LAN (Local Area
Network).
• Allocate the same network address (usually the 3rd segment of IP address) as the computer that is
connected to the printer.
• If you are using the printer in the network environment where IP addresses are automatically
acquired, prepare an IP address for the printer outside of the address range for DHCP.
To Next Page
Loading...
Need help?
General