User’s Guide – Ultima cutting plotter
40 AP-75032, Rev 2.2, 20/04/07
3.2.7.4. ‘Remove’
To remove a previously saved user setting, please follow the instructions mentioned below.
Step 1 : Press the [PRESETS] key.
Step 2 : Use the [UP] or [DOWN] key to select the following display.
Presets
Remove
Choose user
Step 3 : Following display will appear.
→ User 1
Enter = select
↑ = Up
↓ = Down
Step 4 : Use the [UP] or [DOWN] key to select the user setting you want to delete.
Step 5 : Press the [ENTER] key to confirm. The Ultima cutting plotter will delete the selected user setting.
Notes
To cancel the changes of the parameter, press the [CANCEL] key. The display will show the previous
value for the parameter.
When you press the [EXIT] key the changed value will be ignored and you go back to the previous menu.
To Next Page
Loading...
