MUTOH ValueJet 1608 HS - Page 109

User’s Guide ValueJet 1608 HS
Printer menu
AP-75810 - Revision 2.0 109
5
PF Adj menu
To make various settings on the media feed compensation. After changing the media,
perform a media feed compensation.
Initial print menu
Performs an initial adjust print
Setup item Settings Description
PF
Initial print
Performs initial adjust print
 ENTER: shifts to the sub menu
Initial Change
Set up initial adjust change
 ENTER: shifts to the sub menu
Confirm print
Performs confirm print
 ENTER: shifts to the sub menu
Micro print
Performs a micro adjustment print
 ENTER: shifts to the sub menu
Micro change
set up micro adjustment change
 ENTER: shifts to the sub menu
---
 CANCEL: shifts to the previous menu
Setup item Settings Description
FeedLength
100 mm to <250 mm>
to 500 mm
Changes the length of the media feed
direction for initial adjust print.
 ENTER: determines the setting. The
operation panel displays “Printing” and
the initial adjust print starts. After printing
the printer returns to Normal.
---
 CANCEL: shifts to the previous menu
Downloaded From ManualsPrinter.com Manuals