MUTOH ValueJet 1608 HS User Manual

User’s Guide ValueJet 1608 HS
Printer menu
110 AP-75810 - Revision 2.0
Initial change menu
Sets up Initial Adjust change.
If the initial print result shows that the value differs from the actual length, enter the
compensation value.
Confirm Print menu
Performs confirm print
Micro Print menu
Performs micro adjustment print
Setup item Settings Description
Init.
Initial print menu
setting value ± 50.00
mm
sets the initial adjust change
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Setup item Settings Description
FeedLength
100 mm to <250 mm>
to 500 mm
Changes the length of the media feed
direction for the confirm print.
 ENTER: determines the setting. The
operation panel displays “Printing” and
the initial adjust print starts. After
printing, the printer enters the Normal
state.
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Setup item Settings Description
Micro print
Printing
Prints the PF pattern with a focus on the
micro adjustment value.
Printing interval 1min
---
 CANCEL: shifts to the previous menu.
Stops printing and returns to the
previous menu if printing is in progress.
Downloaded From ManualsPrinter.com Manuals

MUTOH ValueJet 1608 HS Specifications

General

Brand	MUTOH
Model	ValueJet 1608 HS
Category	Printer
Language	English