MUTOH ValueJet 1608 HS - Page 111

User’s Guide ValueJet 1608 HS
Printer menu
AP-75810 - Revision 2.0 111
5
Micro Change menu
Sets up Micro Adjustment Change
Pre heater menu
Sets up the Pre heater temperature.
Preheat the media before printing
Setup item Settings Description
Micro Change
- 20 pulse to <0
pulse> to 20 pulse
Sets up Micro Adjustment Change
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Note
 Preset temperature of Pre Heater varies depending on the media.
Setup item Settings Description
Pre Heater
OFF/ <30°C> to 50°C
sets the pre heater temperature.
1 = Roll media
2 = Pre Heater
3 = Print head
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Downloaded From ManualsPrinter.com Manuals