MUTOH ValueJet 1608 HS - Page 113

User’s Guide ValueJet 1608 HS
Printer menu
AP-75810 - Revision 2.0 113
5
After heater menu
Set this menu to dry printed media.
StandbyHeating menu
Sets the time to preheat the heater while the printer is in standby mode.
Note
 Preset temperature of Drier varies depending on the media.
Setup item Settings Description
After heater menu
OFF/ <30°C> to 50°C
sets the Drier temperature.
1 = Roll media
2 = Drier
3 = Print head
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Setup item Settings Description
StandbyHeating
10 min to <60 min>
Sets the time to preheat the heaters.
When the set time has passed. all the
heaters switch OFF
---
 ENTER: saves the setting and shifts to the
previous menu.
 CANCEL: Cancels the setting and shifts to
the previous menu
Downloaded From ManualsPrinter.com Manuals