Before using VJ-1628X OPERATION MANUAL
144 3.7 Print quality adjustment
• A rough adjust print pattern is printed.
(Starts printing after warming up is complete.)
• For the Adjust print pattern, the same patterns will be printed repeatedly on both sides and center
of the media.
4. Check the print results on both sides and center of the media and select the number that looks most
aligned between 1 and 21.
• “12” is selected in the next printing sample.
• “11” represents the current setting value.
• When the line is aligned, the bold line on its left side does not have a white vertical line.
5. “PatternA: 11” is displayed on Operation panel.
123456789101112131415161718192021
Pattern name
Print information
Bi dir
Low H.Height
normal speed
large drop family
111213
Not adequate Adequate
Not adequate
To Next Page
Loading...
Need help?
General