VJ-1628X OPERATION MANUAL Panel setup menu
5.1 Setup menu 201
Slant Check Sets up slanting detection during media loading.
•[Enter] key: shifts to the sub menu.
5.1.14 Slant Check menu
Auto Cleaning Sets up the time for auto cleaning during standby, before printing, and during printing.
•[Enter] key: shifts to the sub menu.
5.1.15 Auto Cleaning menu
Ink Status Displays the various information about Ink cartridges (ink status) that are installed in Slots.
•[Enter] key: shifts to the sub menu.
5.1.16 Ink Status menu
Roll Length Sets up the roll media length.
•[Enter] key: shifts to the sub menu.
5.1.17 Roll Length menu
Exhaust fan Set the operation of Exhaust fan.
•[Enter] key: shifts to the sub menu.
5.1.18 Exhaust Fan menu
Longstore Wash Print head with the cleaning fluid.
•[Enter] key: shifts to the sub menu.
5.1.19 Longstore menu
CR Maintenance Performs maintenance.
•[Enter] key: shifts to the sub menu.
5.1.20 CR Maintenance menu
Initialization Returns the settings of the printer to default.
•[Enter] key: shifts to the sub menu.
5.1.21 Initialization menu
Life Times Displays the operational life time of each part.
•[Enter] key: shifts to the sub menu.
5.1.22 Life Times menu
IP Address Sets the IP address of the printer.
•[Enter] key: shifts to the sub menu.
5.1.23 IP Address menu
Subnet Mask Sets the subnet mask of the printer.
•[Enter] key: shifts to the sub menu.
5.1.24 Subnet Mask menu
Gateway Sets the gateway.
•[Enter] key: shifts to the sub menu.
5.1.25 Gateway menu
Header dump Set whether or not to display the Header dump menu.
•[Enter] key: shifts to the sub menu.
5.1.26 Header Dump menu
White maintenance Sets up white ink’s maintenance operation.
• [Enter] key: shifts to the sub menu.
5.1.27 White maintenance menu
Start Feed Rewinds or feeds the media the amount specified by the set value.
• [Enter] key: Moves to the sub menu.
5.1.28 Start Feed Menu
Setup item Description
To Next Page