VJ-1324X OPERATION MANUAL Maintenance
6.1 Replacing consumable components 199
4. Install the ink bag and smart chip card to high capacity pack adapter.
• To install or remove the high capacity pack adapter to/from the ink bag and smart chip card, refer
to the operation manual included with high capacity pack adapter.
5. Shake the high capacity pack adapter gently two to three times and insert it to the slot.
• Make sure that the ink bag and smart chip are installed on the high capacity pack adapter before
inserting it to the slot. If the high capacity pack adapter is inserted into the slot without the ink bag,
the remaining information will be rewritten and the ink bag will not be usable.
• Insert the high capacity pack adapter all the way to the end of the slot.
6. Confirm that the operation panel returns to Normal.
• If the high capacity pack adapter is replaced during a print job, the printer resumes printing.
• Replacing the high capacity pack adapter is complete.
To Next Page
Loading...
