VJ-1324X OPERATION MANUAL Before using
3.6 Adjust Print 89
4. Confirm that the confirmation pattern printing result is as follows.
• Check each of the confirmation patterns A to F.
a. When the printing result is Adequate;
You do not need perform print quality adjustment.
The procedure for print quality adjustment is complete.
b. When the printing result is Not adequate;
You need to perform print quality adjustment.
• Perform rough adjustment when the misalignment is large.
3.6.2.2 Custom Rough Adjustment Pattern
• Perform micro adjustment when the misalignment is small.
• When all patterns A to F require adjustment:
3.6.2.3.1 Fine Pattern ALL
• When any pattern of A to F requires adjustment: 3.6.2.3.2 Fine Pattern A to F
Bi dir
Low H.Height
normal speed
large drop family
Adequate Not adequate Not adequate
To Next Page
Loading...
