VJ-1324X OPERATION MANUAL Before using
3.6 Adjust Print 91
• While “Warming Up” is displayed, do not touch Platen and Media guide.
They become very hot and you could burn yourself.
• You can start printing during warming up.
4.4.7 Start Printing during Warm up
• Starts a rough adjustment pattern printing.
(Starts printing after warming up is complete.)
• For the rough adjustment pattern, the same patterns will be printed on both sides and center of
the media.
• 6 rough adjustment patterns (A to F) are printed. Enter the adjusted values.
1234567891011
1234567891011
Bi dir
Low H.Height
normal speed
large drop family
Bi dir
Low H.Height
normal speed
small drop family
Pattern name
Print information
To Next Page
Loading...
Need help?
General