Suspension and wheels
F
- 28 -
Front suspension adjustment
(F4 RR MY13)
Refer to values contained in the table to adjust front
suspension.
The adjustment of rebound and com-
pression damping can be performed
only by operating the digital functions
of the dashboard. For the modification
of these parameters, refer to the proce-
dures described at page 79 of Section B
- “Maintenance”.
Type of set-up
Normal Sport* Rain
Spring preload 7 turns 8 turns 7 turns
Rebound damping 10 clicks 6 clicks 20 clicks
Compression damping 13 clicks 12 clicks 18 clicks
F4 RR MY13
Spring preload
Spring preload
Spring
preload
q Spring preload adjustment
- In order to access to the spring preload adjustment
nut, lift the protection sheath and detach the con-
nector by using a flat head screwdriver.
Adjustments contained in the table
must be carried out from initial referen-
ce positions:
- Spring preload: Turn counter-clockwi-
se to end stroke.
- When the adjustment operations have been com-
pleted, reattach the connector and replace the pro-
tection sheath.
(*): To use the vehicle in this configura-
tion, MV Agusta suggests to increase
the rear suspension spring preload of 1
mm (see page 85 of this chapter).
NOTE
NOTE
NOTE
To Next Page
Loading...
