- 12 -
Brakes
H
Slowly squeeze the brake lever to bring the pads in
contact with the disc and also checking that there is no
sponginess in the action of the lever. Air bubbles
should not rise in the chamber.
If the bleeding has been done correctly, the movement
of the lever is short and without any elastic effect.
Repeat the bleeding operation if there is still spongi-
ness at the lever.
Top-up the level of the fluid until it reaches the maxi-
mum mark.
Pour new brake fluid into the chamber until it reaches
the maximum level.
Recommended brake fluid: AGIP Brake 4
Utilise only the prescribed brake fluid from
sealed containers. NEVER use old or used
brake fluid.
To Next Page
Loading...
