Cooling system
- 9 -
L
Remove the tube.
Before carrying out this operation, position a collection
container under the engine to collect any residual
liquid.
Carry out the said operations with care.
Pour the remaining coolant inside the
radiator into an appropriate container.
Do not dispose of engine coolant in the envi-
ronment. Collect in an appropriate container
and dispose of it according the norms in
force.
With the aid of a screwdriver, unhook and remove the
holding clamps of the lower water union tube, both
from the right side and from the left side of the motorcy-
cle.
Remove the tube from the supports and check vibra-
tion damper conditions.
NOTE
To Next Page
Loading...
