Firewall Protection
167
ProSecure Unified Threat Management (UTM) Appliance
To set up IP/MAC bindings:
1. Select Network Security > Address Filter > IP/MAC Binding. The IP/MAC Binding
screen displays. (The following figure shows some bindings in the IP/MAC Binding table
as an example.)
Figure 97.
2. Enter the settings as explained in the following table:
Table 35. IP/MAC Binding screen settings
Setting Description
Email IP/MAC Violations
Do you want to
enable E-mail Logs
for IP/MAC Binding
Violation?
Select one of the following radio buttons:
• Yes. IP/MAC binding violations are emailed.
• No. IP/MAC binding violations are not emailed.
Note: Click the Email Notification link to ensure that emailing of logs is enabled on
the Email and Syslog screen (see Configure Logging, Alerts, and Event Notifications
on page 422).
IP/MAC Bindings
Name A descriptive name of the binding for identification and management purposes.
MAC Address The MAC address of the PC or device that is bound to the IP address.
To Next Page
Loading...
