Using the Setup Wizard to Provision the UTM in Your Network
53
ProSecure Unified Threat Management (UTM) Appliance
After you have completed the steps in the Setup Wizard, you can make changes to the
security services by selecting Application Security > Services. For more information about
these settings, see Customize Email Protocol Scan Settings on page 178 and Customize
Web Protocol Scan Settings and Services (Web Applications) on page 194.
Setup Wizard Step 5 of 10: Email Security
Figure 29.
SSL Handshaking to Websites
Note: SSL handshaking is supported only on the UTM9S.
Facebook
Scanning of Facebook is disabled by default. To enable it, select the
corresponding check box. (This option is not shown in the previous figure, but
it is shown in Figure 110 on page 195.)
Tools
Alexa Toolbar
Scanning of these tools is disabled by default. To enable any of these tools,
select the corresponding check box.
GoToMyPC
Weatherbug
Yahoo Toolbar
Table 7. Setup Wizard Step 4: Services screen settings (continued)
Setting Description
To Next Page
Loading...
Need help?
General
