Network and System Management
416
ProSecure Unified Threat Management (UTM) Appliance
3. Enter the settings as explained in the following table:
1. Click Apply to save your settings.
Note: For additional information about how to set up a UTM9S with a
ReadyNAS, see Appendix D, ReadyNAS Integration.
Configure the Quarantine Settings
You can apply the quarantine settings only after you have integrated a ReadyNAS with the
UTM9S (see the previous section).
 To configure the quarantine settings:
1. Select Administration > ReadyNAS Integration > Quarantine Settings. The
Quarantine Settings screen displays:
Figure 250.
2. To enable the UTM9S to quarantine files, select the Yes radio button.
Table 102. ReadyNAS Integration screen settings
Setting Description
ReadyNAS Server The IP address of the ReadyNAS server.
ReadyNAS Username The user name to access the ReadyNAS. By default, the user name is admin.
ReadyNAS Password The password to access the ReadyNAS. By default, the password is netgear1.
To Next Page
Loading...
Need help?
General
