Wireless Module for the UTM9S
551
ProSecure Unified Threat Management (UTM) Appliance
4. Click Apply to save your settings.
Configure Advanced Profile and WMM QoS Priority
Settings
Advanced Profile Settings
The advanced profile settings let you configure advanced WPA and WPA2 settings and
related RADIUS settings.
 To configure advanced profile settings:
1. On the Profiles screen (see Figure 315 on page 538), select the check box to the left of
the profile.
2. Under the List Of Profiles table, click the Advanced Configuration button. The Advanced
Configuration screen displays:
Preamble Mode Specify the preamble mode by making a selection from the drop-down list:
• Long. A long transmit preamble might provide a more reliable connection or
a slightly longer range. This is the default mode.
• Short. A short transmit preamble gives better performance.
Protection Mode Specify the CTS-to-self protection mode (CTS stands for Clear to Send) by
making a selection from the drop-down list:
• None. CTS-to-self protection mode is disabled. This is the default mode.
• CTS-To-Self-Protection. CTS-to-self protection mode is enabled. This mode
increases the performance but reduces the throughput slightly.
Power Save Enable To enable the Wi-Fi Multimedia (WMM) Power Save feature, select the Power
Save Enable check box. This feature saves power for battery-powered
equipment by increasing the efficiency and flexibility of data transmission. Clear
the check box to disable the feature, which is the default setting.
Table 144. Advanced Wireless screen settings (continued)
Setting Description
To Next Page
Loading...
Need help?
General
