NETGEAR UTM9S

418
11
11. Monitoring System Access and
Performance
This chapter describes the system-monitoring features of the UTM. You can be alerted to
important events such as a WAN port rollover, WAN traffic limits reached, login failures, and
attacks. You can also view status information about the firewall, WAN ports, LAN ports, active
VPN users and tunnels, and more. In addition, the diagnostics utilities are described. This
chapter contains the following sections:
• Enable the WAN Traffic Meter
• Configure Logging, Alerts, and Event Notifications
• Monitor Real-Time Traffic, Security, and Statistics
• View Status Screens
• Query the Logs
• Query the Quarantine Logs (UTM9S Only)
• View, Schedule, and Generate Reports
• Use Diagnostics Utilities
Note: The Quarantine configuration menu shows on the UTM9S only,
accessible under the Monitoring main navigation menu.
Note: All log and report functions that are part of the Logs & Reports
screen and some of the functions that are part of the Diagnostics
screen require that you configure the email notification server—see
Configure the Email Notification Server on page 422.
Note: For all UTM models except for the UTM9S, the Email Notification
configuration menu is accessible under the Network Config main
navigation menu. On the UTM9S, the Email Notification
configuration menu is accessible under the Monitoring main
navigation menu.