2
ProSecure Unified Threat Management (UTM) Appliance
© 2009–2011 NETGEAR, Inc. All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated
into any language in any form or by any means without the written permission of NETGEAR, Inc.
Technical Support
Thank you for choosing NETGEAR. To register your product, get the latest product updates, get support online, or
for more information about the topics covered in this manual, visit the Support website at visit us at
http://support.netgear.com.
Phone (US & Canada only): 1-888-NETGEAR
Phone (Other Countries): Check the list of phone numbers at
http://support.netgear.com/app/answers/detail/a_id/984.
Product Updates
Product updates are available on the NETGEAR website at http://prosecure.netgear.com or
http://kb.netgear.com/app/home.
ProSecure Forum
Go to http://prosecure.netgear.com/community/forum.php for information about the ProSecure forum and to
become part of the ProSecure community.
Trademarks
NETGEAR, the NETGEAR logo, ReadyNAS, ProSafe, ProSecure, Smart Wizard, Auto Uplink, X-RAID2, and
NeoTV are trademarks or registered trademarks of NETGEAR, Inc. Microsoft, Windows, Windows NT, and Vista
are registered trademarks of Microsoft Corporation. Other brand and product names are registered trademarks or
trademarks of their respective holders.
Statement of Conditions
To improve internal design, operational function, and/or reliability, NETGEAR reserves the right to make changes
to the products described in this document without notice. NETGEAR does not assume any liability that may occur
due to the use, or application of, the product(s) or circuit layout(s) described herein.
Revision History
Publication
Part Number
Version Publish Date Comments
202-10780-01 1.0 September 2011 • Addition of the UTM9S with the following major new features:
- xDSL module (see Chapter 1, Introduction and Chapter 3,
Manually Configuring Internet and WAN Settings)
- Wireless module (see Chapter 1, Introduction and
Appendix B, Wireless Module for the UTM9S)
- ReadyNAS integration, quarantine options, and quarantine
logs (see Connect to a ReadyNAS and Configure
Quarantine Settings (UTM9S Only), Query the Quarantine
Logs (UTM9S Only), and Appendix D, ReadyNAS
Integration
- PPTP server (see Configure the PPTP Server (UTM9S
Only))
- L2TP server (see Configure the L2TP Server (UTM9S
Only))
• Update of the VPN client sections with the new VPN client (see
Chapter 7, Virtual Private Networking Using IPSec Connections)