Managing Users, Authentication, and VPN Certificates
377
ProSecure Unified Threat Management (UTM) Appliance
c. In the Brief Description field, enter a description of the VLAN. This field is optional.
3. Click the Add table button. The new VLAN is added to the List of VLAN table.
To delete a user from the List of VLAN table, click the Delete table button in the Action
column for the VLAN that you want to delete.
Configure Global User Settings
You can globally set the user session settings for authenticated users. These settings include
the session expiration period, the allowed session idle time, and the default domain that is
presented to the users.
1. To specify the global user configuration settings:
1. Select Users > Configuration. The Configuration screen displays:
Figure 231.
2. Locate the Session Parameters section on screen. Specify the session settings:
• Session Expiration Length. The period after which a session expires and a user
needs to log in again. This setting applies to all users. From the drop-down list, select
either Minutes or Hours. Then, in the field to the left of the drop-down list, enter a
number for the minutes or hours. The session expiration length cannot exceed the
idle time period. By default, the session expiration length is 24 hours.
Note: For information about how to set the time-out period for the web
management interface, see Change Passwords and Administrator and Guest
Settings on page 397.
• Idle Time. The period after which an idle connection is terminated and a user needs
to log in again. This setting applies to all users. From the drop-down list, select either
Minutes or Hours. Then, in the field to the left of the drop-down list, enter a number
To Next Page
Loading...
Need help?
General
