Firewall Protection
154
ProSecure Unified Threat Management (UTM) Appliance
3. Click Apply to save your settings. The new custom service is added to the Custom Services
table.
 To edit a service:
1. In the Custom Services table, click the Edit table button to the right of the service that
you want to edit. The Edit Service screen displays:
Figure 86.
2. Modify the settings that you wish to change (see the previous table).
3. Click Apply to save your changes. The modified service is displayed in the Custom Services
table.
 To delete one or more services:
1. In the Custom Services table, select the check box to the left of each service that you
want to disable, or click the Select All table button to select all services.
2. Click the Delete table button.
Create Service Groups
A service group can contain a collection of predefined and customized services. You use a
service group as a firewall object to which you apply a firewall rule.
Start Port The first TCP or UDP port of a range that the service uses.
Note: This field is enabled only when you select TCP or UDP from the Type drop-down list.
End Port The last TCP or UDP port of a range that the service uses. If the service uses only a single
port number, enter the same number in the Start Port and End Port fields.
Note: This field is enabled only when you select TCP or UDP from the Type drop-down list.
Table 32. Services screen settings (continued)
Setting Description
To Next Page
Loading...
Need help?
General
