Monitoring System Access and Performance
486
ProSecure Unified Threat Management (UTM) Appliance
2. Click the Traceroute button. The results of the traceroute are displayed in a new screen. To
return to the Diagnostics screen, click Back on the browser menu bar.
Display the Routing Table
Displaying the internal routing table can assist NETGEAR technical support in diagnosing
routing problems.
To display the routing table, locate the Network Diagnostics section on the Diagnostics
screen. Next to Display the Routing Table, click the Display button. The routing table is
shown in the Route Display screen that displays as a pop-up screen.
Look Up a DNS Address
A Domain Name Server (DNS) converts the Internet name (for example, www.netgear.com)
to an IP address. If you need the IP address of a web, FTP, mail, or other server on the
Internet, request a DNS lookup to find the IP address.
 To look up a DNS address:
1. Locate the Perform a DNS Lookup section on the Diagnostics screen. In the Domain
Name field, enter a domain name.
Click the Lookup button. The results of the lookup action are displayed in a new screen. To
return to the Diagnostics screen, click Back on the browser menu bar.
Use the Real-Time Traffic Diagnostics Tool
(All UTM Models Except the UTM9S)
This section discusses the Realtime Traffic Diagnostics section of the Diagnostics screen of
all UTM models except the UTM9S.
Figure 290. Diagnostics, screen 2a of 3
You can use the real-time traffic diagnostics tool to analyze traffic patterns with a network
traffic analyzer tool. Depending on the network traffic analyzer tool that you use, you can find
out which applications are using the most bandwidth, which users use the most bandwidth,
how long users are connected, and other information.
To Next Page
Loading...
Need help?
General
