Monitoring System Access and Performance
454
ProSecure Unified Threat Management (UTM) Appliance
To view the active L2TP tunnel users, select Monitoring > Active Users & VPNs > L2TP
Active Users. The L2TP Active Users screen displays:
Figure 271.
The List of L2TP Active Users table lists each active connection with the information that is
described in the following table.
The default poll interval is 5 seconds. To change the poll interval period, enter a new value in
the Poll Interval field, and then click the Set Interval button. To stop polling, click the Stop
button.
View the Port Triggering Status
 To view the status of the port-triggering feature:
1. Select Network Security > Port Triggering. The Port Triggering screen displays. (The
following figure shows one rule in the Port Triggering Rules table as an example.)
Table 120. L2TP Active Users screen information
Item Description
Username The name of the L2TP user that you have defined (see Configure User Accounts on
page 362).
Remote IP The client’s IP address on the remote LAC.
L2TP IP The IP address that is assigned by the L2TP server on the UTM9S.
Action This column is not applicable to L2TP.
To Next Page
Loading...
Need help?
General
