NETGEAR UTM9S Reference Manual

Virtual Private Networking Using IPSec Connections
272
ProSecure Unified Threat Management (UTM) Appliance
Manually Add or Edit a VPN Policy
 To manually add a VPN policy:
1. Select VPN > IPSec VPN > VPN Policies. The VPN Policies screen displays (see
Figure 166 on page 270).
2. Under the List of VPN Policies table, click the Add table button. The Add VPN Policy screen
displays (see the following figure, which shows the UTM50 screen). The WAN drop-down list
(next to Select Local Gateway) is shown on the Add VPN Policy screen for the multiple WAN
port models but not on the Add VPN Policy screen for the single WAN port models.
Figure 167.

NETGEAR UTM9S Specifications

General

Brand	NETGEAR
Model	UTM9S
Category	Network Hardware
Language	English