Network and System Management
409
ProSecure Unified Threat Management (UTM) Appliance
2. When the product support page displays, click the Download tab to view the available
firmware versions.
3. Follow the instructions onscreen to download the firmware to your computer.
To upgrade the UTM’s firmware from a downloaded file and reboot the UTM:
1. In the Firmware Upload section of the Firmware screen, click Browse to locate and
select the previously saved firmware upgrade file (for example,
UTM50-Firmware-1.3.4.0.pkg).
2. Click Upload.
Uploading firmware to the UTM stops any firmware downloading
process that might be occurring and removes any downloaded
and uploaded firmware files from the UTM. While the upload is
occurring, do not leave or refresh the Firmware screen.
When the firmware upload process is complete, the new firmware version is displayed in
the Firmware Upload section of the screen; a firmware version that previously might have
been displayed in the Firmware Download section of the screen is no longer shown:
Figure 246. Firmware screen, after firmware upload
To Next Page
Loading...
