EasyManuals Logo

NETGEAR UTM9S Reference Manual

NETGEAR UTM9S
631 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #541 background imageLoading...
Page #541 background image
Wireless Module for the UTM9S
541
ProSecure Unified Threat Management (UTM) Appliance
Security
(continued)
• WPA+WPA2. To configure WPA, select the encryption and authentication.
The remaining configuration depends on the selected authentication:
- For WPA+WPA2 with PSK, select a password.
- For WPA+WPA2 with RADIUS, configure the RADIUS server settings.
- For WPA+WPA2 with PSK+RADIUS, select a password and configure
the RADIUS server settings.
Encryption
Note: WPA, WPA2, and
WPA+WPA2 only.
The encryption that you can select depends on the type of WPA security that
you have selected:
• WPA. You can select the following types of encryption from the drop-down
list:
- TKIP
- TKIP+AES
• WPA2. The encryption is AES.
• WPA+WPA2. The encryption is TKIP+AES.
Authentication
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, specify the authentication by making
a selection from the drop-down list:
• PSK
• RADIUS
• PSK+RADIUS
WPA Password
Note: WPA, WPA2, and
WPA+WPA2 only.
For WPA, WPA2, and WPA+WPA2 only, if you have selected PSK or
PSK+RADIUS authentication, enter a pre-shared key or password. The
password length needs to be between 8 and 63 characters (inclusive).
Enable Pre-Authentication
Note: WPA2 only.
For WPA2 only, if you have selected RADIUS authentication, configure
preauthentication by selecting the check box. Preauthentication allows a
client to roam from one access point to another access point without having to
be reauthenticated.
Radius Server Settings
Note: These settings apply to WPA, WPA2, and WPA+WPA2 only if you have selected RADIUS or
PSK+RADIUS authentication.
Server Name / IP Address The IP address or FQDN of the RADIUS server.
Radius Port The port number on the UTM9S that is used to connect to the RADIUS server.
The default port number is 1812.
Shared Key The shared key that is required for the UTM9S to connect to the RADIUS
server.
Key Life Time This period in seconds after which the encryption key is changed. The default
period is 3600 seconds. Short periods are more secure than long periods but
can slow down the authentication time.
Table 140. Edit Profile screen settings (continued)
Field Description

Table of Contents

Other manuals for NETGEAR UTM9S

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR UTM9S and is the answer not in the manual?

NETGEAR UTM9S Specifications

General IconGeneral
BrandNETGEAR
ModelUTM9S
CategoryNetwork Hardware
LanguageEnglish

Related product manuals