Default Settings and Technical Specifications
602
ProSecure Unified Threat Management (UTM) Appliance
The following table shows the IPSec VPN specifications for the UTM:
Major regulatory compliance
Meets requirements of FCC Class A
CE
WEEE
RoHS
Interface specifications
LAN UTM5, UTM9S, UTM10,
UTM25, and UTM150
4 LAN autosensing 10/100/1000BASE-T, RJ-45, one of
which is a configurable DMZ interface
UTM50 6 LAN autosensing 10/100/1000BASE-T, RJ-45, one of
which is a configurable DMZ interface
WAN Single WAN port models 1 WAN autosensing 10/100/1000BASE-T, RJ-45
Multiple WAN port models 2 or 4 WAN autosensing 10/100/1000BASE-T, RJ-45
1 administrative console port RS-232
1 USB nonfunctioning, included for future management
enhancements
Table 183. UTM IPSec VPN specifications
Setting Specification
Network Management Web-based configuration and status monitoring
Number of concurrent users supported The number of supported site-to-site IPSec VPN tunnels depends on
the model (see Table 1 on page 19).
IPSec encryption algorithm DES, 3DES, AES-128, AES-192, AES-256
IPSec authentication algorithm SHA-1, MD5
IPSec key exchange IKE, manual key, pre-shared key, PKI, X.500
IPSec authentication types Local user database, RADIUS PAP, RADIUS CHAP
IPSec certificates supported CA certificate, self-signed certificate
Table 182. UTM physical and technical specifications (continued)
Feature Specification
To Next Page
Loading...
Need help?
General
