NETGEAR UTM9S

Manually Configuring Internet and WAN Settings
88
ProSecure Unified Threat Management (UTM) Appliance
 To configure DDNS:
1. Select Network Config > Dynamic DNS. The Dynamic DNS screen displays (see the
following figure).
The WAN Mode section on the screen reports the currently configured WAN mode (for
example, Single Port WAN1, Load Balancing, or Auto Rollover). Only those options that
match the configured WAN mode are accessible on the screen.
2. Click the submenu tab for your DDNS service provider:
• Dynamic DNS for DynDNS.org (which is shown in the following figure)
• DNS TZO for TZO.com
• DNS Oray for Oray.net
• 3322 DDNS for 3322.org
Figure 49.
3. Click the Information option arrow in the upper right of a DNS screen for registration
information.