Configure Switching
193
XS708T, XS712Tv2, and XS716T Smart Managed Pro Switch User Manual
6. From the Group IP menu, select the IP multicast address of the MVR group.
7. In the Ports table, click each port that you want to make a member of the MVR group.
A selected port is shown by a check mark.
8. Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
View MVR Statistics
To view MVR statistics:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired connection to connect your computer to the network, or
connect directly to a switch that is off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.
If you do not know the IP address of the switch, see Change the Default IP Address of the
Switch on page 10.
The login window opens.
4. Enter the switch’s password in the Password field.
The default password is password.
The System Information page displays.
5. Select Switching > MVR > Advanced > MVR Statistics.